First Playback
Notice
Navigation Keys
All the keys shown are buttons on the remote
control.
When the DVB-T function is first started, the automatic
channel search must be started.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Connect the aerial (see also Connecting the Aerial,
page 28).
4 Use the navigation keys to select Digital TV.
5 Confirm with à.
6 The sub menu appears.
Set Area
7 Use the navigation keys to select Utilities/Setup.
8 Confirm with à.
9 Use the navigation keys to select Area set.
10 Confirm with à.
11 Use the navigation keys to select your area.
12 Confirm with à.
13 Press ¿ to end the sub menu and return to the
overview.
Digital TV Playback
Scan Channels
14 Use the navigation keys to select Scan Channels.
15 Confirm with à.
16 Use the navigation keys to select OK.
17 Confirm with à.
18 Use the navigation keys to select Auto.
19 Confirm with à.
Television
20 Use the navigation keys to select Video Broadcast.
21 Confirm with à.
22 Change the channel using z/{.
Notice
Displaying Channel Information
When changing channel, channel informa-
tion is displayed on the bottom projection
edge. The information bar is hidden after 5
seconds.
23 Press u to end playback and return to the main
menu.
During playback you can adjust the volume using ¬/
on the remote control. Press « or ¬ repeatedly to
shut off the volume completely.
29