Table of Contents
Advertisement
REMOTE CONTROL DESCRIPTION
A. ASPECT RATIO
Press to change the aspect ratio or geometry of
the image. Different resolutions will allow for
different aspect ratios.
B. RGB SETUP
When entering a computer-type (VESA) signal,
press this to automatically center and resize the
image.
C. POWER
Press this to cycle the monitor between on and
standby.
D. PC/HDTV-1
Selects the 15-pin D-sub input for computer-type
(VESA) signals or HDTV signals.
E. HDTV-2
Selects the 5 BNC terminal input for HDTV signals.
F. INFO
While video is being displayed, this will bring up
timing information about the selected signal.
G. SDTV-1
Selects the first standard definition input, either
S-Video or Composite video based on the toggle
button, on Modular Controller card (see page 10).
H. SDTV-2
Selects the second standard definition input, for
interlaced component video input.
I. DIGITAL IN
Selects the digital video from the DVI input.
J. MENU
Activate or de-activate the menu.
K. MAGNIFY
Zooms in on the image, particularly useful for
computer-type (VESA) images.
L. UP
Scrolls the highlight bar in the menu up.
M. LEFT
Used for scrolling left, particularly during
adjustment menus.
N. RIGHT
Used for scrolling right, particularly during
adjustment menus.
O. DOWN
Scrolls the highlight bar in the menu down.
ASPECT
RATIO
A
PC/HDTV-1
D
SDTV-1
G
H
MENU
J
L, M, N, O
MUTE
Q
P. SET
Use for entering a sub-menu when selected by
high light.
Q. MUTE
Used to mute the sound system.
R. VOLUME -
Used to reduce the volume of the sound system.
S. VOLUME +
Used to reduce the volume of the sound system.
12
POWER
RGB
SETUP
HDTV-2
INFO
SDTV-2
DIGITAL IN
MAGNIFY
SET
VOLUME
-
+
B
C
E
F
I
K
P
R
S
Advertisement
Table of Contents
