9.9.
Remove the SU-Board
1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×3
Board.
9.10. Remove the SD-Board
1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×3
Board.
, ×2
) and remove the SU-
, ×2
) and remove the SD-
9.11. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 9.9.
and 9.10.)
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (×9
Caution:
THERMAL CONDUCTIVE SHEET between Plasma Dis-
play Panel and SC-board should not be removed when
replacing SC-board.
9.12. Remove the SS-Board
1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cables (SS64, SS65 and SS66).
4. Remove the screws (×7
Board.
28
) and remove the SC-Board.
, ×3
) and remove the SS-