Yamaha RX-Z1 Service Manual page 22

RX-Z1/DSP-AZ1
• Details of DIAG menu
In each menu, "SPEAKERS" is always set to "LARGE", D-
RANGE to "MAX", LFE LEVEL to 0dB (-10dB when
DOLBY DIGITAL is used) and CENTER DELAY to 0ms
unless otherwise specified.
1. YSS938 THR
ANALOG BYPASS
• The signal is output through the signal path as shown
below.
• The signal for L/R is output as it is without passing
through the DSP section.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SW: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB
21
1. YSS938 THR
ANALOG BYPS
MAIN L/R CENTER REAR C FRONT L/R REAR L/R
-14.0 dBV -14.0 dBV -14.0 dBV -14.0 dBV -14.0 dBV -4.0 dBV +2.0 dBV
SW L/R SW MONO