MULTIMEDIA SPEAKER SYSTEM
ing with a dry cloth. If you wish to use an aerosol cleaning spray,
do not spray directly on the cabinet; spray onto the cloth. Be care-
ful not to disturb the drive units.
16. Attachments. Do not use attachments not recommended by
the product manufactures, as they may cause hazards.
17. Accessories. Do not place this product on an unstable cart,
stand, tripod, bracket or table. The product may fall, causing seri-
ous injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket or table recommend-
ed by the manufacturer or sold with the product. Any mounting
of the product should follow the manufacturer's instructions and
should use a mounting accessory recommended by the manufac-
turer.
18. Moving the appliance. A product and cart combination should
be moved with care. Quick stops, excessive force and uneven sur-
faces may cause the product and cart combination to overturn.
19. Non-use periods. The power cord of the appliance should be
unplugged from the outlet during lightning storms or when The
apparatus is left unused for a long period of time.
20. Serving. Do not attempt to service this product yourself, as
opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to qualifi ed service per-
sonnel.
21. Replacement parts. When replacement parts are required, be
sure the service technician has used replacement parts specifi ed
by the manufacturer or have the same characteristics as the orig-
inal part. Unauthorized substitutions may result in fi re, electric
shock or other hazards.
22. Mains fuses. For continued protection against fi re hazard, use
fuses only of the correct type and rating. The correct fuse specifi -
cation for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with
very low level inputs or no audio signals. If you do, the speaker
may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from
the power supply is by removing the power cord from the wall
outlet or the product. Either the wall outlet or the power cord en-
www.modecom.eu
8
Need help?
Do you have a question about the MC-2110 and is the answer not in the manual?