Reset Configuration Data; Resources Controlled By; Pnp/Pci Configurations - Spectra MB720 User Manual

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - Award WorkstationBIOS CMOS Setup Utility

Reset Configuration Data

Resources Controlled By

IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ for VGA
Assign IRQ for USB
PCI Latency Time(CLK)
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP operating system such as
Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
Assign IRQ for VGA
This field enables the assigning of an IRQ for VGA.
Assign IRQ for USB
This field enables the assigning of an IRQ for USB.
PCI Latency Timer
This field sets the PCI latency clock. By default, the setting is 64.
MB720 User's Manual
PnP/PCI Configurations
Disabled
Menu Level
Auto (ESCD)
Default is Disabled.
Press Enter
Select Enabled to reset
Extended System
Disabled
Configuration Data
Enabled (ESCD) when you exit
Setup if you have
Enabled
installed a new add-on
64
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
BIOS SETUP
ITEM HELP
45