Spectra MB720 User Manual page 38

BIOS SETUP
CPU L2 Cache ECC Checking
When enabled, it allows ECC checking of the CPU L2 cache. Enabling
this feature is recommended because it will detect and correct single-bit
errors in data stored in the L2 cache. It will also detect double-bit errors
but not correct them.
Processor Number Feature
This feature enables the reading of the CPU's serial number read by
external programs. Enable this if your secure transactions require you to
use such a feature.
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after
the system is turned on. If it is set to Enabled, BIOS will skip some
items.
First/Second/Third Boot Device
These fields determine the drive that the system searches first for an
operating system. The options available include Floppy, LS/ZIP,
HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, LAN and Disable.
Boot Other Device
These fields allow the system to search for an operating system from
other devices other than the ones selected in the First/Second/Third Boot
Device.
Swap Floppy Drive
This item allows you to determine whether or not to enable Swap Floppy
Drive. When enabled, the BIOS swaps floppy drive assignments so that
Drive A becomes Drive B, and Drive B becomes Drive A. By default,
this field is set to Disabled.
Boot Up Floppy Seek
This feature controls whether the BIOS checks for a floppy drive while
booting up. If it cannot detect one (either due to improper configuration
or its absence), it will flash an error message.
Boot Up NumLock Status
This allows you to activate the NumLock function after you power up
the system.
34 MB720 User's Manual