Troubleshooting; Technical Specifications - Sanitaire SC6075A Owner's Manual

THE SPRAY PUMP AND VACUUM DO NOT WORK
CAUSE:
1) Power failure.
CAUSE:
1) Spray nozzle is blocked.
2) Solution tank is empty.
3) Solution feed filter blockage.
CAUSE:
1) The recovery tank may be full
*If the fuse blows several times, the machine should be checked by an authorized Service Agent.

TECHNICAL SPECIFICATIONS

Voltage
Pump Power
Pump Pressure
Flow Rate
Vac Hose Length
Vac Motor
Water Lift
Solution Tank Capacity
Recovery Tank Capacity
Sound Pressure Level
Size (L x W x H)
Cable Length
Net Weight
Gross weight
Certification

TROUBLESHOOTING

NO SPRAY OR THE SPRAY IS NOT EVEN
THE VACUUM POWER FAILS
120V
50W
58 psi
.5 gal/min
10 ft
1100W
78 inches
1.5 gallon
1.5 gallon
78 dB(A)
25.6 x 17.7 x 19.7 inches
15 ft.
30 lbs.
36 lbs.
SOLUTION:
1) Check the main fuse*, the power supply
cord, and the plug.
SOLUTION:
1) Check the spray pipe and nozzle.
2) Is there water in the tank? If there is water
in the tank, wait for a couple of seconds for
the pump to build up pressure. If the tank is
empty, fill it as indicated.
3) The filter in the clean water tank, the pipe or
the nozzle may be blocked. Switch off the
unit and perform maintenance.
SOLUTION:
1) Empty recovery tank.
8