Bernette London 7 Instruction Manual page 30

Display Explanation & Operating Instructions
Needle up/down button
By pressing the needle up/down button the
needle will make half a stitch. Depending on
the actual needle position it will stop in the
opposite position, either at the highest or the
lowest position. At the same time the needle
stop position after sewing is permanently set.
When the needle stops down, the needle
down symbol "
Please Note
During sewing, press the needle up/down
button, the machine will stop automatically.
Slide speed
By adjusting the position of the slide speed
the top speed during sewing may be limited.
The position of the slider defines the sewing
speed at full stroke of the foot controller.
For slower speed: Slide toward ( )
For higher speed: Slide toward (+)
When the machine is run with the start/stop
button the position of the slide speed defines
the actual sewing speed.
Set/disp button
In the Normal Mode press this button to
memorize stitch pattern number and safe
the stitch length and width value.
In the function mode press this button to
toggle selected function and memorize it.
In the Memory Mode press this button to
memorize a pattern or to switch display from
stitch number to memory position and back.
" will display.
–
29