Blind Hem - Bernette London 7 Instruction Manual

40 Basic Sewing Procedures

Blind Hem

Reverse Overcasting
side
2.5~4.0 1.0~2.0
16mm 8mm
Reverse
stitch side
b
07 Blind hem/lingerie for firm fabrics :
16 Blind hem for stretch fabrics :
8mm
Fold the fabric as illustrated with the reverse
side uppermost.
First carry out an overcasting stitch as
shown in left picture.
Please Note:
It takes practice to sew blind hem. Always
make a sewing test first.
Place the fabric under the foot. Turn the
handwheel forwards by hand until the needle
swings fully to the left. It should just pierce
a
the fold of the fabric. If it does not, adjust the
stitch width accordingly.
Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
Sew slowly, guiding the fabric carefully along
the edge of the guide.
Turn over the fabric.