Setting The Station; Adjusting The Sensitivity Of The Station Search; Saving A Station - Blaupunkt Palm Beach C51 Operating Instructions Manual

Setting the Station

There are a number of ways to set the
station.
Automatic station search
Press the or
The next station that can be received is
tuned in.
Manual station tuning
You can also tune to the station manu-
ally.
Press the or
Note:
Manual station tuning is only possi-
ble if the RDS convenience func-
tion is deactivated.
Browsing a chain of stations
(FM only)
If a station is providing several programs
it is possible to browse through this
"chain" of stations.
Press the or
der to change to the next link in the
station chain.
Note:
In order to use this function, the
RDS convenience function must be
active.
You can only change in this way to a
station that you have already received
at least once. Use the Scan or Travel-
store function for this purpose.
button, :.
button, :.
button, :, in or-
RADIO OPERATION
Adjusting the Sensitivity of the
Station Search
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
Press the MENU button, 8.
Press the or
often as is necessary for "SENS" to
appear in the display.
button, :.
Press the
The current value of the sensitivity is
shown on the display. "SENS HI6" indi-
cates maximum sensitivity, and "SENS
LO1" the lowest. If "SENS LO" is cho-
sen, lo appears in the display.
Adjust the desired sensitivity with
key, :.
the or
When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.

Saving a Station

Saving a Station Manually
Choose the desired memory level
from FM1, FM2, FMT or one of the
other wavebands, MW or LW.
Tune to the station you want.
Choose one of the station buttons
1 - 6, >, on which you want to
store the station, and hold it
pressed for longer than two sec-
onds.
button, :, as
39