Photocapture Center™ Print Settings; Print Quality; Paper Options - Brother DCP-J125 Advanced User's Manual

Chapter 4
PhotoCapture Center™
print settings
You can change the print settings temporarily
for the next print.
The machine returns to its default settings
after 3 minutes.
Note
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as a new
default on page 14.)
Press Start
Quality
Paper Type
Paper Size
1 No. of prints
(For View Photo(s)
You can see the total number of photos that will
be printed.
(For Print All Photos, Print Photos)
You can see the number of copies of each
photo that will be printed.
(For DPOF printing)
This does not appear.

Print Quality

a
Press a or b to choose
Print Quality.
Press OK.
b
Press a or b to choose Normal or
Photo.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
12
4
1
001 00 001
Photo
4

Paper options

Paper Type
a
Press a or b to choose Paper Type.
Press OK.
b
Press a or b to choose the paper type
you are using, Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61 or Other Glossy.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
Paper and print size
a
Press a or b to choose Paper Size.
Press OK.
b
Press a or b to choose the paper size
you are using, 10x15cm, 13x18cm, A4
or Letter.
Press OK.
c
If you chose A4 or Letter, press a or b
to choose the print size.
Press OK.
Example: Printed Position for A4 paper
1 2
8 x 10cm 9 x 13cm
4 5
13 x 18cm 15 x 20cm
d
If you do not want to change additional
settings, press Colour Start to print.
4
4
4
3
10 x 15cm
6
Max. Size