Brother MFC-J2320 Basic User's Manual page 19

When using A3 or Ledger size paper:
a
Pull the paper tray completely out of the
machine.
Rest the tray on a flat surface.
b
Push the blue slider until it locks in the
release position, and then extend the
tray until the blue slider returns to and
locks in the default position. Open the
tray cover and make sure the triangular
mark inside the tray (1) lines up with the
mark (2) for B4 JIS/LGL, as shown in
the illustration.
1
2
Push the blue slider a second time until
2
it locks in the release position, and then
extend the tray until the blue slider
returns to and locks in the default
position. Open the tray cover and make
sure the triangular mark inside the
tray (1) lines up with the mark (2) for
A3/LGR, as shown in the illustration.
c
Gently press and slide the paper
guides (1) to fit the paper size. Make
sure the triangular mark (2) on the paper
guide (1) lines up with the mark for the
paper size you are using.
Loading paper
1
2
2
1
11
2