Setting The Timer; Enabling/Disabling Voice-Activated Recording - Philips Voice tracer DVT2500 User Manual

8.1.6 Setting the timer
You can use this function to start a recording at a specified date and
time.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the recording settings menu Ó.
3
Press h / b to select the function
4
Press the record key, g, to confirm.
5
Press h / b to select the function
time at which recording starts.
6
Set the date and time for the start of recording as described in
also chapter 8.3.1 Set date & time, page
7
Press the record key, g, to confirm.
8
Set the date and time for the end of recording as described in
also chapter 8.3.1 Set date & time, page
9
Press the record key, g, to confirm.
10
Press h / b to select the desired folder for the recording.
30
Settings
.
Timer
, in order to set the
Set time
(see
34).
(see
34).
11
Press the record key, g, to confirm.
If this feature is on, the À icon is displayed. The device will
X
start recording at a specified time.
12
Press h / b to select the
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
8.1.7 Enabling/disabling voice-activated recording
If voice-activated recording is enabled, recording session will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence, and
resume only when you begin speaking again.
Use the voice activation level to set the volume at which the device
should begin recording.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the recording settings menu Ó.
3
Press h / b to select the function
4
Press the record key, g, to confirm.
function, to turn off the timer.
Off
.
Voice Activation
Table of contents