Setting Auto Divide - Philips Voice tracer DVT2500 User Manual

5
Press h / b to select the function
6
Press the record key, g, to confirm.
7
Press h / b to switch between voice activation level 1 (very
sensitive, the device switches on at low volume) and level 9 (lowest
sensitivity, the device turns on at higher volume). Press h / b
when the device is in recording mode to adjust the voice activation
level.
8
Press the record key, g, to confirm.
If this feature is on, the ‚ icon is displayed.
X
9
Press h / b to select the
activation.
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
Table of contents
.
On
function, to turn off voice
Off
8.1.8 Setting auto divide
You can automatically divide large recordings, such as a multi-hour
meeting recording. Once the set time has been reached, the device
stops the current recording and automatically starts a new one.
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the recording settings menu Ó.
3
Press h / b to select the function
4
Press the record key, g, to confirm.
5
Press h / b, to select whether longer recordings are to be
automatically divided after 30 or 60 minutes, or switch the feature
off.
6
Press the record key, g, to confirm.
7
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
.
Auto divide
31
Settings