9 Setting Mode
From the main menu select Setting mode, press MENU
button to enter. The Setting mode interface includes:
Backlight, Auto off, Language, Key tone, Memory select,
Memory information, Micro-SD information, Format device,
Firmware Version , System time, Record time, Reset.
9.1 Backlight Time
The backlight time function can be set at: 15, 30, 45 and
Constant. If there's no operation on the device for the
set time, the backlight turns off automatically. If you select
Constant, the backlight is to be always. See the below picture
of Backlight Time setting:
9.2 Auto off
If there's no operation on the device for a set time, the
system automatically shuts down. If the time is set at 0, the
system will not automatically shut down. See the below auto
off picture:
9.3 Language
From the Language menu you can choose a language as
system language. See the following interface picture:
9.4 Key tone
From the Key Tone settings menu, you can choose to open
or close the key tone. After closing key tone, the key tone
will not work in any key operation. See the following picture:
EN
49