Setting The Timer - Philips DVT4000 User Manual

9.1.10 Setting the timer
You can use this function to start a recording at a specified date and
time. The device can record from the device's microphone, the radio
or an external sound source.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the
Timer
4
Press the record key, g, to confirm.
5
Press + / –/ b to select the function
time at which recording starts.
6
Set date and time as described
time, page 48).
7
Press the record key, g, to confirm.
8
Press + / – to select the
Record source
source.
9
Press + / – to select if the recording should be made from a
microphone, an external source, or a radio station. Select the pre-
set station before you record from the FM radio.
Table of contents
function.
, in order to set the
Set time
(see also chapter 9.3.1 Set date &
function to set the sound
10
Press the record key, g, to confirm.
If this feature is on, the À icon is displayed. The device will
X
start recording at a specified time.
11
Press + / – to select the
Off
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.11 Enabling/disabling voice-activated recording
If voice-activated recording is enabled, recording session will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence, and
resume only when you begin speaking again.
Use the voice activation level to set the volume at which the device
should begin recording.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the
Voice Activation
4
Press the record key, g, to confirm.
5
Press + / – to select the
On
6
Press the record key, g, to confirm.
function to turn off the timer.
function.
function.
43
Settings