Viking Range 5 Series Installation Manual page 31

Installation
(VWH/CVWH 12"H. Wall Hoods w/Recirculating Kit)
3
Attach with screws and lock washers provided.
5
Remove electrical box cover.
6
Flip hood over. Insert 6" of electrical wiring through the
top of vent hood and secure. Refer to local codes.
To reduce the risk of fire, electric shock, or injury to
persons, observe the following:
• Use this unit only in the manner intended by the
manufacturer. If you have any questions, contact
the manufacturer.
• Before servicing or cleaning unit, switch power off
at service panel and lock service panel to prevent
power from being switched on accidentally. When
the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such
as a tag, to the service panel.
1
CAUTION: Secure vent hood. Make sure mounting
31
4
Attach with screws.
W A R N I N G
7
screws are secured into framing. Use additional
mounting screws and wall anchors, if necessary.