Osd Warning Messages - Dell 1707FPc Service Manual

Factory
Reset:

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of
synchronization.
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either
the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and
Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.
NOTE: When the Dell Soundbar is not properly connected to the
monitor, the audio menu is not available.
Reset the OSD menu options to the factory-preset values.
Exit — Select to exit out of Reset to Factory Settings menu without resetting
any OSD options.
Position settings only — Change the settings for Image Position back to
original factory settings.
Color settings only — Change the Red, Green, and Blue settings
back to their original factory settings and set the default setting
for Normal Preset.
All settings — Change all the user-adjustable settings including color, position,
brightness, contrast and OSD hold time to the factory defaults. The language of
the OSD does not change.
1. Analog Input
Cannot Display This Video Mode
Optimum Resolution 1280 x1024 60Hz
16
Dell 1707FPc
2. Digital Input