LED Sequence and Cause
Drive FLASHING.
The drive mechanism has detected
an error.
Drive, Tape and
Ready FLASHING.
There is a firmware download
problem.
Drive and Ready
ON with Tape and
Clean OFF.
then
Sequence alternates
repeatedly.
The drive has a firmware error.
Action required
Load a new cartridge. If the error persists, power
cycle or reset the drive.
If the Drive LED remains on, call for service.
Insert a cartridge to clear the LED sequence. If the
condition persists, call for service.
Power cycle or reset the drive.
Upgrade the firmware. If the condition persists, call
for service.
45