Replacement Parts; Ec Declaration Of Conformity - Flymo Micro Lite User Instructions

If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna UK Ltd., through its Authorised
Service Repairers will effect the repair or replacement to the cus-
tomer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjust-
ment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart
or tampered with by any person not authorised by Husqvarna
UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important
that you read the instructions contained in this Operator's Manual
and understand how to operate and maintain your machine:
Plastic cutters
Reference no.:
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation............................Lawn Trimmer
Designation of Type(s)...........MLite28, MLite 30
Identification of Series............See Product Rating Label
Year of Construction...............See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
given in the table.
The maximum hand / arm vibration weighted value a
product(s) is given in the table.
2000/14/EC: The Measured Sound Power L
Conformity Assessment Procedure...............
Notified Body.................................................
Newton Aycliffe 10/04/2012
M.Bowden
Global R & D Director - Walk behind
Keeper of technical documentation
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Power (kW)
Measured Sound Power L
Guaranteed Sound Power L
Sound pressure L
Uncertainty K
Hand / arm vibration a
Uncertainty K
Weight (Kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2012 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5804296-01
Guarantee & Guarantee Policy

Replacement Parts

FLY014

EC Declaration of Conformity

at the operator's position, measured according to EN60335-2-91 is
pA
measured according to EN ISO 20643 on a sample of the above
h
& Guaranteed Sound Power L
WA
Annex VI
Intertek, Cleeve Road, Leatherhead, Surrey, KT22 7SB, England
(dB(A))
WA
(dB(A))
WA
(dB(A))
pA
(dB(A))
pA
(m/s 2 )
h
(m/s 2 )
ah
of Flymo S.A.
Husqvarna AB
S-561 82
Huskvarna
Sweden
Failures not covered by guarantee
* Replacing worn or damaged plastic cutters
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance
with the instructions and recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim: Plas-
tic Cutters, Cutting Head, Electric Mains cable.
* Caution!
Husqvarna UK Ltd. does not accept liability under the war-
ranty for defects caused in whole or part, directly or indirectly
by the fitting of replacement parts or additional parts that are
not either manufactured or approved by Husqvarna UK Ltd. ,
or by the machine having been modified in any way
Part no.: 513846990
values are according to the tabulated figures.
WA
MLite28
28
7,250
1.0
96
96
84.1
2.5
1.21
1.5
4.5
MLite30
30
7,250
1.0
96
96
84.1
2.5
1.21
1.5
4.5