Advertisement
If there is a problem with your cooker, check the following details before requesting service to your
dealer. Sometimes the cooker may not operate as desired if used incorrectly.
Case
When the rice is
not cooked.
Is there power cut while in cooking?
When the rice is
not well cooked.
Bean (other
grains) is half
cooked.
Rice is too watery
or stiff.
When the water
overflow.
When you smell
something while
warming.
"
" sign is
appeared.
Did it not finished
the cooking for a
long time with
"
".
When the button
cannot operate
with "
" .
When the
,
button are not
operate with "
"
When the rice is
badly sticky.
Check points
button is pressed?
Did you use the measuring cup to
measure your rice?
Did you measure proper water?
Did you clean the rice before cooking?
Did you put rice in water too long time?
Is the rice old or dry?
Is bean (other grains) is too dry?
Is it selected the menu correctly?
Did you measure proper water?
Did you open the top cover before
cooking was finished?
Did you use the measuring cup?
Did you measure proper water?
Is it selected the menu correctly?
Did you close the top cover.
Please check the power cord input to
wall socket.
Did it warm over 12 hours?
Is there any other substance such as
rice scoop or cold rice.
There is some problem on the
temperature sensor.
Check the rated voltage?
Is there inner pot?
Did you turn the Lock/Unlock Handle to
"Lock"
Is "pressure" lamp on?
Is there any rice or any other alien
substance on the temperature sensor,
heating plate or the bottom surface of
the inner pot?
Do the following
Press the
button once.
And check
sign on the display.
Re-press the
button.
Refer to page 11~12.
Insert some more water (about half of 1 level)
Soaked or steam beans other grains
before cooking in the pressure cooker in
order to avoid partially cooked beans or
grains. Beans should be soaked for-to-
minutes or steamed for-to-minutes prior
to cooking, depending on your taste.
Select the correct menu.
Measure the proper water.
Open the top cover after cooking
finished.
Refer to page 11.
Close the top cover perfectly.
Always be keeping the power on while
warming.
As possible as warming time is within
12 hours.
Don't warm rice with other substance.
Please contact to dealer or service center.
120V only.
If were any problem on the circuit,
please contact dealer or service center.
It is normal when inserted only water.
Please insert inner pot.
Please turn the Lock/Unlock Handle to
"Lock"
Clean all the alien substance on the
temperature sensor, heating plate or the
bottom surface of the inner pot.
Advertisement
