Download Print this page

Cuckoo CRP-FA06 Fuzzy Operating Instructions Manual page 19

Fa06/fa08 fuzzy series electric pressure rice cooker/warmer

Advertisement

How to keep warm
Using Keep Warm function for more than 12hours may cause discoloration or an objectionable odor in the rice.
During keep warm and reheat mode, set the cover lid handle at "Lock"
(Could impact on a keep warm function or a breakdown of the clamp knob)
After the cooking process is finished it is automatically switched to warming function. Make sure to mix the
1
cooked rice well as soon as the cooking process is completed with the rice scoop (within 5 minutes)
2
. Do not keep the scoop inside the pot while warming the rice.
When using a wooden scoop it can cause serious bacteria and odors.
The mixed and brown rice cannot be in such good condition as white rice while in warm function due to their
3
characteristics. Therefore do not keep mixed and brown rice in function for a long period of time.
4
If the amount of rice inside the pot isn't that much, keep it at the center of the pot.
5
Do not warm the cold rice or do not mix the cold rice with the warm.
6
. Always keep the power connected while warming the rice.
If you turn the lock/unlock handle to "Unlock", the "UNLOCK" will be displayed. But the rice is still in
warming function. The warming efficiency is better when the handle is kept at "Lock".
7
Because there will always be alien substances on the internal side of the top cover(heating part), always
remember to clean the top cover before using.
8
During warm mode, the rice can turn white and rise. In this case, mix the rice.
Controlling method of warming temperature
When the color of the rice hasn't changed but the rice smells bad, or when the rice feels cold.
Raise the warming temperature about 1~2
After pressing the
Press the
for 5 seconds over.
button.
The setting temperature when take the products out of
warehouse can be different from an operating anual.
When the color of the rice turns yellowish and rice smells bad.
Reduce the warming temperature about 1~2
This can be done according to the same method but this by pressing the
During the warming mode, the strength and weakness of warming can be readjusted.
-Press
button to enter Warming L/H Control Mode (default: H)
-Pressing
button alternates H
H: select when much water runs-off from top cover when opening
L: select when the rice near the jar becomes too softened
-After 7 seconds, set value will be entered automatically.(Pressing any buttons except
-During the setting, pressing
During the warming mode, warm temperature is not adjustable.
After pressing
button and press
button
L, L
H
button will exit from the Setting Mode without changing the preset value
button for 5 seconds to set the warming temperature.
It will automatically
start in 7 seconds
Press
,
,
and
buttons to
complete the setting.
button.
,
buttons to enter set value)

Advertisement

loading

This manual is also suitable for:

Crp-fa08 fuzzy