Download Print this page

Cuckoo CRP-FA06 Fuzzy Operating Instructions Manual page 15

Fa06/fa08 fuzzy series electric pressure rice cooker/warmer

Advertisement

Cuckoo's patented technology based on variable circuit design. User can select the degree of "softness"and
"glutinosity & tastiness" to meet a user's specific taste.
Longer "SOAK" Time: rice becomes soft and glutinous (selectable in 4 steps)
Longer "HEAT" Time: rice becomes tasty (selectable in 4 steps) melanizing will occur
Above 2 functions can be selected both or individually.
In the cooking time selecting menu, press
MY MODE" function applies to "Glutinous, Mixed, GABA, or Dried" menu.
Unless one of "Glutions, Mixed, GABA, or Dried" menu is selected,
"MY MODE" setting screen
Pressing
button will alternate
"SOAK" Time Control Mode and
"HEAT" Time Control Mode.
MY MODE step Indication
Example : set-up "SOAK" and "HEAT" Time will be displayed as follows during the waiting mode.
SOAK : 1st step (default: 0 min.)
HEAT: 1st step (default: 0 min.)
CHOICE , SOAK , HEAT
indicators are turned off
Set-up time is stored until the next reset. No need to set-up at every cooking.
During Cooking, Warming and preset time cooking modes, SOAK and HEAT Time cannot be readjusted.
MY MODE' function may influence scorching or cooking quality. Ensure that cooking time is not changed, by children.
Default settings are "SOAK" Time 0 min., "HEAT" Time 0 min.
"MY MODE" function may elongate cooking time according to set-up time.
Scorching of rice may occur by longer "HEAT" Time.
button. "SOAK" will be activated, as shown in the figure below
"SOAK" Time Control Mode
"HEAT" Time Control Mode
SOAK: 3rd step
HEAT: 1st step (default: 0 min.)
CHOICE , SOAK indicators are on
- HEAT indicator is off
button cannot be entered.
Press
button to set
Soaking Time step.
- CHOICE" indicator will be lit up
- SEAK" indicator will be lit down
Press
button to set
Heating Time step
- CHOICE indicator will be
lit up
- HEAT indicator will be
lit down
SOAK: 1st step (default: 0 min)
HEAT: 3rd step
CHOICE , HEAT indicators are on
SOAK indicator is off
Setting completed screen after
7seconds, set-up time will be
entered with a buzzer sound.
(Pressing any buttons except
,
or
button will
also enter the set time)
HEAT
SOAK

Advertisement

loading

This manual is also suitable for:

Crp-fa08 fuzzy