Download Print this page
Pentair Raychem QuickStat-TC Installation And Operation Manual
Pentair Raychem QuickStat-TC Installation And Operation Manual

Pentair Raychem QuickStat-TC Installation And Operation Manual

Hide thumbs Also See for Raychem QuickStat-TC:

Advertisement

INSTALLATION AND OPERATION MANUAL
APPROVALS
TECHNICAL DATA
Supply voltage
Maximum switching current
GFCI
Ambient setpoint range
Floor setpoint range (F mode) 40°F to 104°F (5°C to 40°C)
Floor limit setpoint range
Operating temperature range 32°F to 120°F (0°C to 50°C)
Storage temperature range
KIT CONTENTS
Item Qty
Description
A
1
QuickStat-TC thermostat
B
2
Mounting screws
C
1
Floor temperature sensor 15 ft (4.6m)
D
5
Wire nuts
E
1
Screwdriver
THERMAL MANAGEMENT SOLUTIONS
QuickStat-TC
F
A
2
120 V, 208 V, 240 V, 60 Hz
15 A
Class A, 5 mA trip level
40°F to 86°F (5°C to 30°C)
(A/AF mode)
40°F to 104°F (5°C to 40°C)
(AF mode)
–4°F to 120°F (–20°C to 50°C)
ML-RaychemQuickStatTCthermostat-IM-H58517      01/13
GENERAL INFORMATION
Use of this Manual
This manual covers the installation and operation of the Raychem
QuickStat-TC thermostat and must be used with the following
document:
• QuickNet System Installation Manual (H57704)
Important: For the Pentair Thermal Management warranty and
agency approvals to apply, the instructions included in this manual
and product packages must be followed.
Features
The QuickStat-TC is an electronic thermostat that must be used
with the Raychem QuickNet floor heating mats.
QuickStat-TC provides the following features:
• Integrated Class A, Ground-Fault Circuit Interrupter (GFCI).
• Operates at 120 V, 208 V, 240 V, 60 Hz.
• Switches on your heating system at predetermined times on
different days of the week.
• Offers 4 periods each day that you can set at different
temperatures.
• Comes with a preprogrammed schedule that is suitable for most
installations. However, you can customize this program any time
you wish.
• Allows you to reset the thermostat to factory settings.
• Changes the start time of a heating period automatically so that
the desired temperature is reached at the time that you set.
• Multiple temperature control options so users can control the
system based on floor temperature (F), ambient air temperature
(A), or both (AF).
• On/Off switch to turn off thermostat during summer months.
A
B
C
D
E
1 / 6

Advertisement

loading

Summary of Contents for Pentair Raychem QuickStat-TC

  • Page 1 QuickStat-TC thermostat and must be used with the following document: • QuickNet System Installation Manual (H57704) Important: For the Pentair Thermal Management warranty and agency approvals to apply, the instructions included in this manual and product packages must be followed.
  • Page 2: Installation

    Installation Important: This thermostat must be installed according to all 5. Insert the floor sensor cable through one of the two openings on the power base and connect to terminals 1 and 2 (no polar- national and local electrical codes. The installation must be ity).
  • Page 3 Note: This function is disabled (default setting) when the Thermostat Controls and Display clock loses its setting To enable Daylight Savings Time: The following figure shows the thermostat controls. The thermo- stat has three temperature control modes: 1. Press and hold the Day button for 3 sec- onds until DLS appears on the screen.
  • Page 4 Modifying the Schedule Programming Programming The user can change the programming to better meet their lifestyle. To do so: The QuickStat-TC comes with a pre-programmed default 1. Press Pgm to access the programming mode. Period 1 will be schedule. The schedule consists of 4 periods per day which displayed.
  • Page 5 Vacation Mode In this mode, the QuickStat-TC is set to the Vacation setpoint temperature and will override all programming until Vacation mode is disabled. To place the QuickStat-TC in this mode: 1. Press the button, and the icon appears on the display. 2.
  • Page 6 Fax: +1.650.474.7711 thermal.info@pentair.com Pentair, QuickNet and QuickStat are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice. © 2009-2013 Pentair. 400-115-052 THERMAL MANAGEMENT SOLUTIONS ML-RaychemQuickStatTCthermostat-IM-H58517      01/13...