Table of Contents
Advertisement
Chapter 1 Installing OS
Hyper-V2.0 support
20
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
Note
The above paging file sizes are recommended for collecting debug
•
information (dump file). The initial size of the Windows partition paging
file must be large enough to store dump files.
Make sure you set a sufficient paging file size. If the paging file is
insufficient, there will be a virtual memory shortage that may result in
an inability to collect correct debug information.
•
Regardless of the sizes of internal memory and write debug
information, the maximum size of the dump file is "size of internal
memory + 300 MB".
•
When installing other applications or other items, add the amount of
space needed by the application to the partition.
If the partition size for installing Windows is smaller than the recommended size, expand the
partition size or add another hard disk drive.
Important
For restrictions on size of drive C specific to this server, refer to
Chapter 1 (3.12 Creating Volume).
When new partition is created, 100MB at the top of hard disk drive is
Tips
secured for boot partition.
Example:
If 40,960MB (40GB) is specified for partition size, usable space will be:
40,960MB – 100MB = 40,860MB
•
Refer to the following web site for information related to Hyper-V2.0.
http://www.58support.nec.co.jp/global/download/w2k8r2/hyper-v/hyper-v-v2.html
•
See Chapter 1 (7. Precautions for Using Hyper-V).
3. Setting Up Windows Server 2008 R2
System partition (40,860MB)
Boot partition (100MB)
Boot partition is not recognized by operating system.
Free space
Advertisement
Table of Contents
