Operating Instructions
12
Cycle Settings
DRYING TEMPERATURE
The appropriate drying temperature will auto-
matically be indicated for the cycle selected.
For best results
Follow the fabric care label instructions
on items to be dried.
To change the preset temperature, press the tem-
perature button to scroll to the desired setting.
To protect your fabrics, not all temperatures are
available with every cycle. If a temperature is not
appropriate for the cycle, it cannot be selected and
will not be lit by pressing the temperature button.
The temperature selected for the cycle will be
remembered and recalled each time that cycle is
selected in the future.
NOTE
To change the Temperature once the cycle has
begun, press the pause button, make the new
selection and press start again.
SANITIZE
Recommended for durable fabrics and towels. Use
this selection to remove harmful bacteria from your
clothing or other items where sanitization is desired.
NOTE
Only sanitizing cycles have been designed to
meet the requirements of NSF P154 protocol for
sanitization effi cacy.
NSF Protocol P154
Sanitization Performance of
Residential Clothes Dryers
This option will kill 99.9% of bacteria with no car-
ryover of bacteria between loads. A higher tempera-
tures is required. Please check fabric care labels to
prevent damage.
HIGH
Recommended for most cotton fabrics.
NORMAL
Recommended for wrinkle free, easy care, light-
weight fabrics and bulky loads.
LOW
Recommended for delicate fabrics.
AIR DRY
This setting (no heat) should only be used with a
time dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like materials;
to refresh clothing, stuffed animal, pillows or blan-
kets; and to dust draperies.
DRYNESS LEVEL (AUTO DRY)
The appropriate dryness level will automatically
be indicated when the cycle is selected.
To change the preset level, press the dryness but-
ton to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are
available with every cycle. If a dryness level is not
appropriate for the cycle, it cannot be selected and
will not be lit by pressing the dryness button.
The dryness level selected for the cycle will be
remembered and recalled each time that cycle is
selected in the future.
NOTE
To change the dryness level once the cycle has
begun, press the pause button, make the new
selection and press start again.
Select the normal dryness level for most Auto Dry
cycles.
Occasionally a load may seem too damp or over-
dried at the end of the cycle. To increase drying time
for similar loads in the future, select max. For loads
requiring less drying time, select less.
Select damp for items you wish to partially dry be-
fore hanging or ironing.