Download Print this page

Drying Temperature; Dryness Level - Electrolux EIMGD60JMB0 Use & Care Manual

Iq-touch front-load gas & electric dryer
Hide thumbs

Advertisement

Operating
instructions
Cycle
Settings
Drying Temperature
The appropriate
drying temperature
wil auto-
maticaly
be indicated for the cycle selected.
For best results
Follow the fabric care label instructions
on items to be dried.
To change the preset temperature, press the tem-
perature button to scroll to the desired setting.
To protect your fabrics, not all temperatures are
available with every cycle. If a temperature
is not
appropriate for the cycle, it cannot be selected and
will not be lit by pressing the temperature
button.
The temperature
selected for the cycle will be
remembered and recalled each time that cycle is
selected in the future.
0,
_+0
Bar_tjze
_@_
Is,,xea6
_tumbk
@@@
...............
@ .........=.,
o io_,
o i==_
..........
dll,_o_41I,v =111111
_
> °=,=,_ > ....
_@ ,,=o =,y
start
_
I
_'_
To return to factory settings,
press these two buttons at the
same time and hold until the
signal sounds.
SANITIZE
Recommended for durable fabrics and towels. Use
this selection to remove harmful bacteria from your
clothing or other items where sanitization is desired.
NSF
Protocol
P154
Sanitization
Performance
of
Residential
Clothes
Dryers
This option will kill 99.9% of bacteria with no car-
ryover of bacteria between loads. A higher tempera-
tures is required. Please check fabric care labels to
prevent damage.
HIGH
Recommended for most cotton fabrics.
NORMAL
Recommended for wrinkle free, easy care, light-
weight fabrics and bulky loads.
LOW
Recommended for delicate fabrics.
AIR DRY
This setting (no heat) should only be used with a
time dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like materials;
to refresh clothing, stuffed animal, pillows or blan-
kets; and to dust draperies.
Dryness
Level (Auto Dry)
The appropriate
dryness level will automatically
be indicated when the cycle is selected.
To change the preset level, press the dryness but-
ton to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are
available with every cycle. If a dryness level is not
appropriate for the cycle, it cannot be selected and
will not be lit by pressing the dryness button.
The dryness level selected for the cycle will be
remembered and recalled each time that cycle is
selected in the future.
Select the normal dryness level for most Auto Dry
cycles.
Occasionally a load may seem too damp or over-
dried at the end of the cycle. To increase drying time
for similar loads in the future, select max. For loads
requiring less drying time, select less.
Select damp for items you wish to partially dry be-
fore hanging or ironing.

Advertisement

loading

  Also See for Electrolux EIMGD60JMB0

  Related Manuals for Electrolux EIMGD60JMB0