5. Tighten the pedals (46,47) into the crank. Tighten each pedal
by turning bolt towards the front of the bike. NOTE: Each
pedal is labeled with a "R" for right or a "L" for left. (Tighten
the left pedal by turning counter-clockwise and the right pedal
by turning clockwise).
5
46, 47
6. Connect the computer cable from handlebar post (55) to
the end from main frame (1). Slide the tension cable assembly
up into post.
55
6
1
1
8
7. Use the screws (56) and arch washers (6) to connect handle-
bar post (55) and main frame (1).
55
56
6
7
1
8. Attach the handlebar (61) to handlebar post (55) with the
screws (59) and washers (11).
61
11
59
55
6
56
11
59
8
9