Moving The Printer To Another Location; Setting The Printer Up In A New Location; Shipping The Printer - InfoPrint 1850 User Manual

•
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
•
Disconnect all cords and cables from the printer before moving it.
•
Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the
same time.
Notes:
–
Remove all printer options before moving the printer.
–
Use the handholds located on both sides of the printer to lift it off the optional drawer.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer
warranty.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:
•
Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart
used to move the options must have a surface able to support the dimensions of the options.
•
Keep the printer in an upright position.
•
Avoid severe jarring movements.

Setting the printer up in a new location

Allow the following recommended amount of space around the printer:
1 Right Side 20 cm (8 in.)
2 Left Side 31 cm (12 in.)
3 Front 51 cm (20 in.)
4 Rear 20 cm (8 in.)
5 Top 31 cm (12 in.)

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
3
2
1
Maintaining the printer
5
4
3
2
1
256
5
4