Ipv6 Menu; Auto Configuration - InfoPrint 1850 User Manual

Menu item
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
AutoIP
Yes
No
Enable FTP/TFTP
Yes
No
Enable HTTP Server
Yes
No
WINS Server Address
DNS Server Address

IPv6 menu

Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x>
Menu item
Enable IPv6
On
Off

Auto Configuration

On
Off
View Hostname
View Address
View Router Address
Description
Specifies the DHCP address and parameter assignment setting
Specifies the RARP address assignment setting
Note: On is the factory default setting.
Specifies the BOOTP address assignment setting
Note: On is the factory default setting.
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enables the built-in FTP server, which allows you to send files to the printer using
the File Transfer Protocol.
Note: Yes is the factory default setting.
Enables the built-in web server (Embedded Web Server). When enabled, the
printer can be monitored and managed remotely using a web browser.
Note: Yes is the factory default setting.
Lets you view or change the current WINS Server Address
Lets you view or change the current DNS Server Address
Std Network Setup or Net <x> Setup
Description
Enables IPv6 in the printer
Note: On is the factory default setting.
Specifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
Lets you view the current setting
Note: These settings can be changed only from the Embedded Web
Server.
Understanding printer menus
169
IPv6