Table of Contents
Advertisement
About the Information Display
Each time you press the <B> button, the information display will
change.
AF mode
•d : Live mode
•c : Face detection Live
mode
•f: Quick mode
Shooting mode
Drive mode
White balance
Picture Style
Multiple exposures
Flash exposure
compensation
AE lock
Flash-ready
Shutter speed
The histogram can be displayed when [Expo. simulation: Enable] is set
(p.207).
You can display the electronic level by pressing the <B> button
(p.62). Note that if the AF mode is set to [u Live mode] or the camera is
connected to a TV set with an HDMI cable, the electronic level cannot be
displayed.
When <g> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
If <g> is blinking, it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bright-light conditions.
However, the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.
Auto Lighting Optimizer
Aperture
Exposure level
A Shooting with the LCD Monitor
AF point (Live mode)
Histogram
FEB
Magnification/
Magnifying position
AEB
Exposure
simulation
Battery check
Highlight tone priority
ISO speed
Digital compass
Possible shots
203
Advertisement
Table of Contents
