Setting The Image-Recording Quality - Canon GP series Owner's Manual

Setting the Image-Recording Quality

You can set the image size (number of recorded pixels for JPEG/RAW)
and JPEG quality (compression rate).
H Selecting the Image Size
3, H, 5, or 6 will record the image as a JPEG image. With 1,
41, or 61, use Digital Photo Professional (provided software,
p.410) to process the image after shooting. 1 images can also be
processed with the camera.
You can set the image size in one of the two ways below.
Using the Rear LCD Panel to Select the Image Size
When [Record func.] is set to [Rec. separately] (p.115), turn the <6>
dial to select a card and set the image size for the respective card.
In this manual, the image size and JPEG quality (compression rate,
p.123) are commonly referred to as the image-recording quality.
1
Press the <H> button.
2
Select the desired image size.
Turn the <5> dial to select the
image size.
If 1/41/61 and 3/H/5/6
are displayed at the same time, the
RAW and JPEG image will be
recorded simultaneously on the card.
Turn the <6> dial to select the card
to record or playback images (p.116).
(9)
117