Table of Contents
Advertisement
8
Shoot subsequent exposures.
When [On:Func/Ctrl] is set, the merged multiple-exposure
image will be displayed.
With Live View shooting, the multiple-exposure images merged
so far will be displayed. By pressing the <B> button, you can
display only the Live View image.
After you shoot the set number of exposures, multiple-exposure
shooting will be canceled. With continuous shooting, after you
finish shooting the set number of exposures while holding down
the shutter button, the shooting will stop.
With multiple exposures, the more exposures there are, the more
noticeable the noise, irregular colors, and banding will be. Also, as noise
increases with higher ISO speeds, shooting at low ISO speeds is
recommended.
If [Additive] is set, the image processing after taking the multiple exposures
will take time. (The access lamp will light up for longer than usual.)
If you perform Live View shooting while [On:Func/Ctrl] and [Additive] are
both set, the Live View function will stop automatically when the multiple
exposure shooting ends.
In step 8, the brightness and noise of the multiple-exposure image
displayed during Live View shooting will be different from the final
multiple-exposure image recorded.
If [On:ContShtng] is set, let go of the shutter button after shooting the
set number of exposures.
If the power switch is set to <2> or the battery is replaced after you set
multiple exposure settings, multiple-exposure shooting will be canceled.
If you switch the shooting mode to <w1/w2/w3> while shooting,
multiple-exposure shooting will end.
When multiple exposure is set or during multiple-exposure shooting, you
cannot use the grayed out functions in the camera menu.
If you connect the camera to a personal computer or printer, multiple-
exposure cannot be set.
When [On:Func/Ctrl] is set, you can press the <x> button during shooting
to view the multiple exposures taken so far or delete the last single
exposure (p.185).
P Multiple Exposures
183
Advertisement
Table of Contents
