Table of Contents
Advertisement
3 Setting the Power-off Time/Auto Power Off
To save battery power, the camera turns off automatically after a set
time of idle operation elapses. If you do not want the camera to turn off
automatically, set this to [Disable]. After the power turns off, you can
turn on the camera again by pressing the shutter button or other
buttons.
Even if [Disable] is set, the LCD monitor will turn off automatically after 30
min. to save power. (The camera's power does not turn off.)
3 Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [Hold]. To
not have the image displayed, set [Off].
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
1
Select [Auto power off].
Under the [52] tab, select [Auto
power off], then press <0>.
2
Set the desired time.
Select the desired setting, then press
<0>.
1
Select [Image review].
Under the [z3] tab, select [Image
review], then press <0>.
2
Set the desired time.
Select the desired setting, then press
<0>.
Before You Start
57
Advertisement
Table of Contents
