Panasonic KV-S5076H Operating Manual page 75

Symptom
Double feeding occurs
frequently or the scanner
stops loading while scanning.
Paper jams occur frequently.
Possible Cause
The paper feed roller, separation
roller, double feed prevention roller,
drive rollers, or free rollers are dirty.
The sensors or reflectors are dirty.
The paper feed roller, separation
roller, or double feed prevention roller
have become worn down.
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
The document is printed on an
unsupported type of paper or thick
paper.
The length of the paper is too short.
The scanning method is set to
manual.
The document is not aligned correctly.
The document set on the feed tray
has too many pages.
The document is wrinkled.
The paper feed roller, separation
roller, double feed prevention roller,
drive rollers, or free rollers are dirty.
The sensors or reflectors are dirty.
The document is not aligned correctly.
The document set on the feed tray
has too many pages.
Remedy
Clean the paper feed roller,
separation roller, double feed
prevention roller, drive rollers, and
free rollers. (page 56)
Clean all of the sensors and the
reflectors. (page 54)
Replace the paper feed roller module,
and double feed prevention roller.
(page 61)
Flatten the document (page 24) and
load it again after reducing the pages.
Make a copy of the document on
paper of an acceptable type and
thickness (page 23), and scan the
copy.
Make a copy of the document on
paper of an acceptable size (page 23),
and scan the copy.
Set the scanning method to
continuous scanning (Auto) with the
manual feed selector. (page 11)
Realign the document. (page 26)
Remove pages from the document
until it is under the limit mark on the
document guides.
Smooth out the document.
Clean the paper feed roller,
separation roller, double feed
prevention roller, drive rollers, and
free rollers. (page 56)
Clean all of the sensors and the
reflectors. (page 54)
Realign the document. (page 26)
Remove pages from the document
until it is under the limit mark on the
document guides.
Operating Manual
Appendix
75