Cleaning the Conveyor
1.
With a soft and dry cloth, wipe off any dirt on the conveyor (A).
1
2.
With a soft and dry cloth, wipe off any dirt on the self-cleaning brushes (C, D) of the reference plates
(A, B).
•
Push E and F in the direction indicated by the arrow to rotate the reference plate on the ADF door
side so that you can clean the brush. In the same way, push G and H in the direction indicated by the
arrow to rotate the reference plate on the main unit side to clean the brush.
5
7
3
1
2
4
Care and Maintenance
6
8
Operating Manual
53