AVS
Series
Wiring
Electric Shock
Field wiring to the tube heater must be connected and grounded in accordance with
national, state, provincial and/or local codes. In the United States refer to the most current
revisions to the ANSI/NFPA 70 Standard and in Canada refer to the most current revisions
to the CSA C22.1 Part I Standard.
Figure 3.22
•
Field Wiring Diagram
0VA - 0
S
T
3.0
Installation
WARNING
!
•
Multiple Line Voltage Heater(s), Single 120V Control
must
0VA
29
•
Electrical Requirements
NOTE:
A
0VA
•
Field Wiring