Directory
S�eed dial
The telephone system has 9 speed dial locations (2-9, 0), and a voicemail
access location
to dial more quickly. You can store up to 30 digits in each location. Speed
dial assignments can only be selected from the existing directory entries. The
voicemail access number must be manually entered. In the directory, speed dial
locations are indicated by their number on the bottom left side of the screen.
Assign a speed dial number
1. When the telephone is idle, press MENU
2. Press q
or p
CID
3. Press q
or p
CID
4. Press q
or p
CID
then press
MENU
then enters your directory list.
5. Press q
or p
CID
the selected speed dial location.
/SELECT to save.
6. Press
MENU
Assign your speed dial voicemail number
See the Set speed dial voicemail number section on page 8 for instructions
on assigning your speed dial voicemail number.
Make a call using speed dial
When in idle mode, press and hold the dialing key (2-9, 0) corresponding to
the assigned location you wish to call.
Check your voicemail using speed dial
Press and hold the
it has already been assigned.
1, where you can store the telephone numbers you wish
to scroll to >Directory. Press
DIR
to scroll to >Speed dial. Press
DIR
to choose your desired speed dial location (2-9, 0),
DIR
/SELECT. The screen briefly shows Copy from Directory...
to scroll to the phone number you wish to assign to
DIR
1 key on your handset to dial your voicemail number if
.
/SELECT
MENU/
18
SELECT.
SELECT.
MENU/