Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha FZS6V(C) Owner's Manual

Replacing the tail/brake light
bulb
1. Remove the seat. (See page
3-10.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Tail/brake light bulb socket
2. Muffler bracket cover
WARNING
Do not touch the muffler bracket un-
til the exhaust system has cooled.
3. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU32822 4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the seat.
EWA12301
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1. Screw
2. Remove the defective bulb by
3. Insert a new bulb into the socket,
4. Install the lens by installing the
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-34
by removing the screw.
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
screw.
EAU24202
6
ECA11190