Sirius XM RAdio Starmate 8 Quick Start Manual page 86

Configuring Your Starmate 8
OR
2 Manually tune through your local FM channels
Manually tune through your local FM channels on your vehicle's FM radio.
Turn on your vehicle's FM radio. Start at 88.1 and use the 'Manual' tune
function on your vehicle's FM radio to tune through each FM channel one-
by-one (88.1 followed by 88.3 etc.) to locate channels that aren't being used
by a local FM radio station. Write down each FM channel that has only static
or silence on it, until you reach 107.9. Once you have created your list of
available FM channels, you will need to find the one that provides the best
match for Starmate 8.
Tune Starmate 8 to a favorite Sirius channel (or to channel 184, if it's not
activated). Pick the first FM channel on your list and tune the FM radio
to that channel. Then tune Starmate 8 to the same FM channel. (Refer
to "Set and Select an FM Channel" on page 84.) You should hear the
Sirius audio through your vehicle's radio. If you are satisfied with the sound
quality, you're done! If this FM channel doesn't work well for you, work down
the list until you find an FM channel that allows you to hear the Sirius audio
clearly.
NOTE! You may find an FM channel with static or silence that does not work with
Starmate 8. It is possible that some type of inaudible interference is present that
prevents reception of the Sirius broadcast. Your only options are to use another
FM channel or a different audio connection method.
TIP! If you regularly drive from one location to another, such as your daily
commute, you may need to use different FM channels along your route for best
performance. If this is the case, we recommend saving the best FM channels as
presets on your FM radio and Starmate 8. Then you simply select and match the
best channel for the area you are in.
TIP! It will be much more difficult to find available FM channels in large cities
than in most suburban or rural locations. A direct audio connection using the
80