Sirius XM RAdio Starmate 8 Quick Start Manual page 53

v. Tune to the available FM channel
you choose in step 4. Press
to tune in steps of .2, i.e., 99.3 to
99.5. Press
steps of 1, i.e., 99.3 to 100.3. Press
the Select button to select the FM
channel.
vi. Start Using is highlighted. Press
the Select button.
vii. The FM channel you selected will
be confirmed on the display screen.
Starmate 8 will tune to the FM
8 You should hear channel 184, the Sirius Preview channel, through your
vehicle's stereo system. If you are satisfied with the sound quality, the
installation is complete. You are now ready to activate your Starmate 8.
9 If the selected FM channel doesn't work well for you, work down the list of
FM channels until you find one with which you are satisfied. Each time, you
will need to tune your vehicle's FM radio to the FM channel and then set
your Starmate 8 to transmit on the same FM channel (steps 6 & 7).
If the signal reception is good, showing at least one bar in the lower left corner
of the display, but there is no Sirius audio, verify that both Starmate 8 and your
vehicle's FM radio are tuned to the same FM channel (steps 6 & 7). Also ensure
the chosen FM channel is a suitable one to use in your area (step 4). Verify that
nothing is plugged into the AUDIO connector on the PowerConnect Vehicle Dock.
Refer to "Troubleshooting" on page 96 for additional help.
and
and to tune in
channel.
99.3 FM
Set your vehicle radio to the
above channel to enable audio.
47