Setting The Clock; Factory Pre-Sets; Programming The Unit - Danfoss SET2E Installation & User's Instructions

Setting the Clock

Move the slider to SET TIME
position
Use
correct time
Preset programme
The unit is supplied with the following preset programme
which will be active after the unit has been RESET (see
page 10):
ON at 6:30am, OFF at 8:30am.
ON at 5:00pm, OFF at 10:30pm.
To alter these times to suit your requirements, follow the
instructions on page 12.
Accepting the preset programmes
If you are happy to use the preset programmes above you
don't need to do anything else.
Just return the slider to the
RUN position.

Programming the unit

You can programme your heating to come on and go off
twice a day, to suit your requirements. To programme your
unit:
12
and keys to set the