Epson PS-500 Series User Manual page 34

Pairing issues
<When using the product for the first time>
Check
1 Attach the PS-500 to the cradle to cancel the battery protection mode.
2
Enable Bluetooth
3 To check smart device compatibility follow this link
4 Ensure your smart device is connected to the Internet.
5
Remove any other PULSENSE product that could interfere with the Bluetooth
communication.
<When pairing is lost or the PS-500 has been paired with another smart device>
Check
1 Has the PS-500 already been un-paired?
If not, tap the screen twice to enter the menu and press the [B] Button to enter the
Bluetooth
2 Has the PS-500 already been deleted from PULSENSE View?
Delete the PS-500 from the pairing menu in PULSENE View
3 Has the PS-500 already been deleted in the Bluetooth® settings of your smart device?
Delete the PS-500 from the Bluetooth
4
Has Bluetooth
5 To check smart device compatibility follow this link
6 Ensure your smart device is connected to the Internet.
7
Remove any other PULSENSE product that could interfere with the Bluetooth
communication.
®
communication on your smart device.
®
menu. Confirm your selection by pressing the [A] Button
®
communication been enabled on your smart device?
What
www.epson.eu/pulsense
What
®
menu in smart device
www.epson.eu/pulsense
®
®
How to use  34