Getting Started
To record your data
! Important
To record your data it is necessary to register your device with the PULSENSE View PC or smart device
application.
How to cancel the battery protection mode
! Important
- You need to charge the product when using it for the first time.
- The product automatically turns on when being charged.
- Make sure that charging is complete.
1
Attach the PS-500 to the cradle.
1 Hold the top and bottom of the cradle to open it as shown below.
2 Make sure that the terminal on the PS-500 is facing up, and then attach the cradle.
Set up and Basic Operation 15