Updating Applications And Firmware - Epson All in One Printer User Manual

User's Guide
1. Quit all running applications.
2. When installing the printer driver or EPSON Scan, disconnect the printer and the computer temporarily.
Note:
Do not connect the printer and the computer until you are instructed to do so.
3. Install the applications by following the instructions on the website below.
http://support.epson.net/setupnavi/
Related Information
"Uninstalling Applications" on page 78
&

Updating Applications and Firmware

You may be able to clear certain problems and improve or add functions by updating the applications and the
firmware. Make sure you use the latest version of the applications and firmware.
1. Make sure that the printer and the computer are connected, and the computer is connected to the internet.
2. Start EPSON Software Updater, and update the applications or the firmware.
Important:
c
Do not turn off the computer or the printer while updating.
Note:
If you cannot find the application you want to update in the list, you cannot update using the EPSON Software
Updater. Check for the latest versions of the applications from your local Epson website.
http://www.epson.com
Related Information
"EPSON Software Updater" on page 78
&
Applications and Network Service Information
80