Setup The Device - Aztech FG7008GR(AC) User Manual

User Manual

Setup the Device

When installing the router, find an area where there are enough electrical
outlets for the router, the main computer, and your other computer devices.
NOTE: For Singapore Fibre Residential Customers, the FG7008GR(AC) auto-
detects the configuration of your fibre connection. Simply follow the steps
provided below and you may already surf the internet.
a. Power ON your FG7008GR(AC) by connecting and plugging its power
adapter to a power outlet.
b. Connect your ONT device to the FG7008GR(AC)'s WAN port using an
Ethernet cable.
c. You may connect an Ethernet device (e.g. Desktop/PC) on your
FG7008GR(AC)'s Ethernet ports.
NOTE: The POWER, BROADBAND, and INTERNET LEDs should now be
GREEN. If an Ethernet device is connected, its corresponding Ethernet
LED would be in GREEN. The Ethernet LED will also be blinking if there is
activity on the corresponding port.
Page 16 of 88
2
3