Four-Step Buttonholes - Baby Lock Destiny BLDY Instruction And Reference Manual

Four-step Buttonholes

You can sew 4-step buttonholes using the
following 4 stitches together. You can sew any
desired length for the buttonhole when using 4-
step buttonholes. 4-step buttonholes are a good
option when attaching oversize buttons.
Note
• When changing the stitch settings, make
sure that all stitch settings are changed to
match.
Stitch Stitch name
4 steps buttonhole 1
4 steps buttonhole 2
4 steps buttonhole 3
4 steps buttonhole 4
Four-step buttonholes are sewn as shown below.
a
Mark the position and length of the
buttonhole on the fabric.
a Marks on fabric
b Buttonhole sewing
b
Attach monogramming foot "N", and select
stitch
buttonhole.
c
Press the "Start/Stop" button to start
sewing.
d
Sew the desired length for the buttonhole
and press the "Start/Stop" button again.
Presser foot
e
Select stitch
press the "Start/Stop" button.
→ The machine will automatically stop after sewing
the bar tack.
f
Select stitch
buttonhole, and press the "Start/Stop"
button to begin sewing.
g
Sew the right side of the buttonhole and
press the "Start/Stop" button again.
* Sew the right side of the buttonhole the same length
as the left.
h
Select stitch
then press the "Start/Stop" button.
→ The machine will automatically sew off the bar tack
tie and stop when the bar tack is complete.
i
Raise the presser foot and remove the
fabric.
j
Refer to page 149 to open the buttonhole.
SEWING THE STITCHES
to sew the left side of the
to sew the bar tack and
to sew the right side of the
to sew the bar tack and
3
151