Assembly Instructions - Stamina Calm T901 Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at
customerservice@staminaproducts.com.
STEP 1
Attach the LEFT and RIGHT UPRIGHTS(2, 3) to the BASE FRAME(1) with HEX BOLTS(M10x1.5x50mm)
(33) and WASHERS(M10)(43). DO NOT TIGHTEN COMPLETELY.
STEP 2
Connect the LOWER EXTENSION WIRE(24) located on the LEFT UPRIGHT(2) to the SENSOR WIRE(25).
7