Installing Three Sli; Tm -Ready Graphics Cards - ASROCK X99 WS-E/10G User Manual

X99 WS-E/10G / X99 WS-E
TM

2.9.2 Installing Three SLI

-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE7 slot,
another graphics card to PCIE5 slot, and
the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect the auxiliary power source to the
PCI Express graphics card. Please make
sure that both power connectors on the
PCI Express graphics card are connected.
Repeat this step on the three graphics
cards.
Step 3
Align and insert the ASRock 3-Way SLI
Bridge Card to the goldingers on each
graphics card. Make sure the ASRock
3-Way SLI Bridge Card is irmly in place.
ASRock 3-Way SLI Bridge Card
43